Striebig Panel Saws

We have been a major Striebig dealer for over 30 years. Call Hank 800-789-2323 to find the Panel Saw that fits your budget and your needs.

Efficiency: First and foremost, vertical panel saws were designed to cut big rectangles into smaller rectangles, so of course, they do it more efficiently than an all-around machine like a slider. If you are using a slider solely to cut rectangles to make boxes, you are working harder than you should be!
Accuracy, Squareness & Quality of Cut: It would be difficult to make an argument against an upper-end slider on any of these points, but compared to a table saw, there is no comparison on any of these points. That’s mainly because on a vertical saw, the panel is stationary and the saw moves on precision guide-ways through the material, and you’re not relying on an operator to keep the work-piece up against a fence. The quality of cut issue is extremely apparent when cutting solid surface material and melamine.
Material Handling and Operator Ease: This is especially true of a Striebig because of the panel rollers but is true of all verticals. Just think about the way you would carry a sheet from one end of the shop to the other – it’s easier to handle it vertically. Now think about wrestling a sheet horizontally up to and through a table saw.
Space Savings: Vertical panel saws use very little floor space. 70 sq. ft. is all that’s required to cut up to 5′ x 10′ panels (or 95 sq. ft. for 6′ x 14′), as opposed to 200 sq. ft. min. for a table saw or slider just to cut 4′ x 8′ sheets! Remember you need 8′ in front of the blade, 8′ behind the blade, 8′ to the left, and 4′ to the right. How much is your leased floor space worth each month?
Safety: A continually covered saw blade is traveling through a stationary panel. There are no fingers moving past a blade sticking up through a table!

The COMPACT is the entry-level class to the world of precision and quality of STRIEBIG vertical panel saws. 

  • One-piece fully welded frame, able to floor or wall-mount.
  • 10’2” x 5’5” cut capacity; 2-3/8” cut depth
  • Heavy-duty support rollers with integral panel stop
  • Full-length mid-shelf with adjustable spacing for aluminum fingers and built-in wood small parts support area
  • Auto, upward-shifting aluminum support grid w/plastic laths
  • NEW highly efficient dust system, enclosed in cable chain
  • 5-1/4hp, 208-480V, 3 motor with electric brake
  • 250mm carbide saw blade for 2-3/8” depth of cut- Specially designed measuring flip stop for use with small parts
  • Template bar accepts optional stops for common rip cuts• Optional true split-blade scoring saw available 
  • Optional locking rollers, foot-pedal operated 

The STANDARD is the world’s best-selling saw of its kind, and has been successful on the market for more than 50 years. It offers proven technology and STRIEBIG’s exemplary precision. The new STANDARD S same features as the Standard with optional true split-blade scoring, a contemporary new look and options to make work easier.• Swiss made quality for accuracy and durability!

  • 14’1” x 5’6” cut capacity (5’1” max. horizontal rip height)
  • Very stable, all welded steel frame suitable for free-standing or wall-mount installation
  • Heavy-duty panel support rollers with integral foot pedal braking system for ease of material handling
  • Convenient, sturdy, two-section mid-shelf with adjustable aluminum finger allows for comfortable working of small parts and ability to stage material on one side of the saw
  • Snap-in small parts supports included (one pair)
  • Automatic, mechanically shifting support grid with replaceable lath tips
  • Full length measuring channel with inches/metric scales and measuring stop
  • Second measuring channel for repeat dimensions with one auxiliary stop
  • Vertical cutting stations 40 inches on center (1meter optional)
  • High efficiency dust system has added rear collection area with full-length bottom dust collection pipe
  • 7-1/2 hp, 220/440V, 3-phase motor with electric brake
  • 300mm saw blade for 3-1/8” cut depth
  • Main blade, climb-cut scoring for chip-free cutting of melamine, veneers, and laminates (no scoring saw unit available)
  • Template bar with six stops for setting typical horizontal cuts
  • Repeat rip device with roller follower & 5’ capacity
  • Saw head plunging device for cross-cutting tall panels on taller frame sizes

The EVOLUTION has maintained its leading position in the manual vertical panel saw sector. Numerous electronically controlled functions facilitate daily work.

  • Touch-screen monitor for control of most saw functions, information, and diagnostics
  • Digital measuring X-axis stop (for vertical cuts) with fine adjustment, quick and easy referencing, push-button selection to reference from another cut station, and selectable display increments
  • Y-axis digital measuring with fine adjustment on kerf compensation controlled at touch-screen
  • Second measuring channel with three auxiliary stops for repeat cuts, plus “Compact-style” stop
  • Extremely stable, all welded steel frame suitable for free-standing or wall-mount installation
  • Convenient, sturdy, two-section center shelf with moveable aluminum fingers allows for comfortable working of smaller parts and ability to stage material on one side of the saw
  • Automatic recognition and locking of beam at vertical cut stations; unlock at the press of an icon
  • Touch-screen control for rotating, plunging, and locking/unlocking of the saw head and beam
  • Duplicate buttons conveniently located on front of the saw head for plunge, and scoring
  • Automatic locking of the heavy-duty panel support rollers when cut cycle is started
  • Automatic, mechanically shifting, full wood support grid- great for full support of thin, flimsy materials and an added level of dust control
  • Laser light to help guide set-up of horizontal cut position
  • TRK dust system exceeds European standards by 100%; note: requires a collection source
  • Vertical cut stations 40 inches on center (1 meter spacing available for all-metric shops)
  • USB port to enable uploading of Excel lists of part dimensions
  • 7.5 hp, 220V, 3-phase motor with electric brake
  • 300 mm (11-7/8”) HFG (hollow-face) carbide saw blade; ideal for melamine and veneers
  • Document holder (removable) to keep cut lists in optimum viewing position near control panel

Striebig CONTROL – A high degree of sawing procedure automation and a vast array of equipment options are a matter of course. They allow maximum precision and powerful efficiency.

  • Touch-screen monitor for control of most saw functions, information, and diagnostics
  • Automatic saw travel with variable feed rate 10-25 m/min. (33-82 ft./min.)
  • Selectable sawing cycle (cut and return, or cut and stop)
  • Panel end sensor and start position memory to save time (instead of having to travel to end of saw)
  • EPS.Y programmable saw head positioning for horizontal cuts- great for repeat rip cuts!; includes ABO – automatic, laser light top of panel recognition and positioning for a top trim cut
  • Digital measuring X-axis stop (for vertical cuts) with fine adjustment, quick and easy referencing, push-button selection to reference from another cut station, and selectable display increments
  • Second measuring channel with three auxiliary stops for repeat cuts, plus “Compact-style” stop
  • Extremely stable, all welded steel frame suitable for free-standing or wall-mount installation
  • Convenient, sturdy, two-section center shelf with moveable aluminum fingers allows for comfortable working of smaller parts and ability to stage material on one side of the saw
  • Automatic recognition and locking of beam at vertical cut stations; unlock at the press of an icon
  • Touch-screen control for rotating, plunging, and locking/unlocking of the saw head and beam
  • Duplicate buttons conveniently located on front of the saw head for “start cycle”, plunge, and scoring
  • Automatic locking of the heavy-duty panel support rollers when cut cycle is started
  • Automatic, mechanically shifting, full wood support grid- great for full support of thin, flimsy materials and an added level of dust control
  • Laser light to help guide set-up of horizontal cut position
  • TRK dust system exceeds European standards; note: requires a collection source
  • Vertical cut stations 40 inches on center (1 meter spacing optional for all metric shops)
  • USB port to enable uploading of Excel lists of part dimensions
  • 7.5 hp, 220V, 3-phase motor with electric brake
  • 300 mm (11-7/8”) HFG (hollow-face) carbide saw blade; ideal for melamine and veneers
  • Document holder (removable) to keep cut lists in optimum viewing position near control panel

The STRIEBIG 4D opens up an all new dimension for vertical cutting technology. Horizontal and vertical workpiece transport operations are performed fully automatically by the 4D. 

  • 12” Color Touch-screen for control of most saw functions, information, and diagnostics
  • Selectable sawing cycle (cut and return, or cut and stop)
  • Panel end sensor and start position memory to save time (instead of having to travel to end of saw)
  • EPS.Y programmable saw head positioning for horizontal cuts- great for repeat rip cuts!; includes ABO – automatic, laser light top of panel recognition and positioning for a top trim cut
  • Digital measuring X-axis stop (for vertical cuts) with fine adjustment, quick and easy referencing, push-button selection to reference from another cut station, and selectable display increments
  • Extremely stable, all welded steel frame suitable for free-standing or wall-mount installation
  • Convenient, sturdy, two-section center shelf with weight detection allows for comfortable working of smaller parts and ability to stage material on one side of the saw
  • Automatic recognition and locking of beam at vertical cut stations; unlock at the press of an icon
  • Touch-screen control for rotating, plunging, and locking/unlocking of the saw head and beam
  • Duplicate buttons conveniently located on front of saw head for “start cycle”, plunge, next sequence
  • Automatic locking of the heavy-duty panel support rollers when cut cycle is started
  • Automatic, mechanically shifting, full wood support grid- great for full support of thin, flimsy materials and an added level of dust control
  • Laser light to help guide set-up of horizontal cut position
  • TRK dust system exceeds European standards; note: requires a collection source
  • Vertical cut stations 1 meter on center
  • 7.5 hp, 220V, 3-phase motor with electric brake
  • ProLock easy-fix tool clamping system for mounting saw blade
  • 300 mm (11-7/8”) HFG (hollow-face) carbide saw blade
  • Document holder (removable) to keep cut lists in optimum viewing position near control panel